wx
WeChat
email
tel
yun-21
up

Thanh gang đúc liên tục

Phương pháp sản xuất tiết kiệm chi phí; Thích hợp cho gia công, rèn và hàn; Có sẵn nhiều kích thước và cấp độ khác nhau; Độ chính xác kích thước tuyệt vời và khả năng chống mỏi được cải thiện
Continuous Cast Iron Bar
Thanh gang đúc liên tục

Thanh gang đúc liên tục được sản xuất theo tiêu chuẩn Châu Âu, Tiêu chuẩn ASTM và Tiêu chuẩn GB của Trung Quốc. Hình dạng mặt cắt ngang thông thường bao gồm tròn, vuông, chữ nhật và bán nguyệt. Nếu quý khách có yêu cầu hình dạng đặc biệt, chúng tôi cũng có thể đáp ứng.

 

  • Read More About continuous casting copper
  • Read More About continuous casting copper
  • Read More About continuous casting machine parts

 

  • Read More About continuous casting
  • Read More About continuous casting machine parts
  • Read More About ductal iron

 

  • Read More About continuous casting
  • Read More About continuous casting machine parts
  • Read More About ductal iron

 

  • Read More About continuous casting
  • Read More About continuous casting
  • Read More About continuous casting

 



 

 

CẤP ĐỘ VẬT LIỆU THANH SẮT:

 

CẤP VẬT LIỆU TIÊU CHUẨN LIÊN QUAN
HBMCBAR250 EN-GJL-250C ASTM 148 LỚP 35
HBMCBAR500-7 EN-GJS-500-7C ASTM A536 LỚP 80-55-06
HBMCBAR400-15 EN-GJS-400-15C  
HBMCBAR450-12   ASTM A536 LỚP 65-45-12
HBMCBAR600-3 EN-GJS-600-3C ASTM A536 LỚP 80-60-03

 

HÌNH DẠNG ĐƯỜNG KÍNH HOẶC KÍCH THƯỚC CHÉO (MM)
TRÒN 30 ĐẾN 650
QUẢNG TRƯỜNG 30*30 ĐẾN 450*450
HÌNH CHỮ NHẬT 40 ĐẾN 600

 

ỨNG DỤNG

 

Thiết bị áp suất dầu và không khí

Van Van ngăn xếp, Van mô-đun, Van xả áp, Van điều khiển lưu lượng, Van điện từ, Tấm phụ, Ống phân phối
Xi lanh Piston, Nắp đầu, Nắp thanh truyền, Vòng đệm
Người khác Ròng rọc và trục cho quạt gió, Rotor, Mặt bích lót cánh quạt cho máy nén

 

Máy công cụ và máy móc công nghiệp nói chung

Máy công cụ kim loại Van ngăn xếp, Van mô-đun, Van xả áp, Van điều khiển lưu lượng, Van điện từ, Tấm phụ, Ống phân phối
Máy ép phun Van, ống phân phối, xi lanh, tấm lắp ở phía cố định, tấm lắp ở phía di chuyển, tấm đẩy, khối đệm
Máy móc xây dựng và kỹ thuật dân dụng Van, piston xi lanh, ống phân phối
Máy in Con lăn trộn mực, Thanh dẫn mực, Thanh dẫn hướng, Bánh răng
Máy kéo sợi Vỏ ổ trục, Bánh răng, Trọng lượng, Thanh ray, Con lăn trên, Ống dẫn hướng, Ổ trục, Thanh trượt ngang, Giá đỡ ổ trục, Đế trượt, Ống lót, Cam của máy may
Máy nông nghiệp Đầu piston, Nắp đầu, Ròng rọc cho máy kéo, Bạc ròng rọc cho máy gặt đập liên hợp
Người khác Linh kiện cho máy đóng gói giấy, chế biến thực phẩm, chế biến gỗ

 

Ô tô, thiết bị vận tải

Ô tô Bộ giảm xóc, Thanh dẫn van, Phớt cơ khí, Vòng đệm, Ống lót, Trọng lượng, Ống bọc bánh răng đo tốc độ, Phớt cơ khí Đệm làm mát
Cần cẩu và tàu thủy Ống phân phối, Xi lanh, Pít tông, Thanh dẫn van, Động cơ, Ống lót thân van kỹ thuật, khối xi lanh
Cần cẩu Ròng rọc, Vòng đệm, Ống lót, Bánh xe
Người khác Trống tời, Móc thang máy, Trọng lượng, Con lăn băng tải

 

Thiết bị và dụng cụ điện

Con lăn máy nén cho máy điều hòa không khí quay, Spider, Slider, Chốt trượt chéo, Bơm chân không Fax, Bánh răng động cơ, Rotor cho máy làm mát, Phanh đĩa của máy phát điện

 

Khuôn kim loại

Dùng cho kính, đúc khuôn nhôm, nhựa, mài bánh xe, đầu bút, đúc áp lực, đánh bóng thấu kính, phân tích chi tiết cho khuôn vỏ và quy trình hộp lạnh

 

Bơm

Bánh răng của bơm bánh răng, Rotor của bơm trục vít, Phớt trục, Rotor, Mặt bích, Kiểm soát lưu lượng, Van một chiều, Ống lót cần trục, thanh dẫn van cho bơm hóa chất

 

Các bộ phận phổ quát chung

Bánh răng, Ròng rọc, Ròng rọc, Vòng bi, Trục, Ống lót, Cổ áo, Cam, Khớp nối, Mặt bích, Chốt, Trọng lượng, Vỏ, Thanh chốt, Vỏ và nắp, Phớt, Rôto, Đế, Vòng, Con lăn, Đai ốc, Tấm, Phích cắm, Khối, Đường cắt, đồ gá và dụng cụ

 

 

  • Read More About continuous casting process
  • Read More About continuous casting copper
  • Read More About continuous casting process
  • Read More About continuous casting

 

  • Read More About ductal iron
  • Read More About continuous casting

 

  • Read More About continuous casting machine parts
  • Read More About continuous casting copper
  • Read More About continuous casting
  • Read More About continuous casting copper

 

  • Read More About continuous casting
  • Read More About continuous casting

 

  • Read More About continuous casting machine parts
  • Read More About continuous casting
  • Read More About continuous casting machine parts

Continuous cast iron bar sizes

Continuous cast iron bars are semi-finished metal products widely used in mechanical engineering, automotive manufacturing, hydraulic equipment, mold making, and general machinery. They are produced through a continuous casting process, which ensures a dense internal structure, uniform material properties, and excellent machinability. One of the key considerations when selecting continuous cast iron bars is size, as dimensions directly affect machining efficiency, material utilization, and final product performance.

Continuous cast iron bars are available in a broad range of sizes to meet diverse industrial requirements. Common shapes include round bars, square bars, rectangular bars, and hollow bars (tubes). Among these, round bars are the most widely used due to their versatility and ease of machining on lathes. Standard round bar diameters typically range from as small as 20 mm up to 600 mm, although larger diameters can be produced upon request. Lengths are usually supplied in standard sizes such as 1,000 mm, 2,000 mm, or 3,000 mm, with cutting tolerances controlled to meet customer specifications.

Square and rectangular continuous cast iron bars are often selected for components that require flat surfaces or high dimensional stability. Square bar sizes commonly range from 20 × 20 mm to 400 × 400 mm, while rectangular bars may be supplied in various width and thickness combinations. These bars are particularly suitable for machine beds, guide rails, wear plates, and structural parts where rigidity and vibration damping are important.

Hollow continuous cast iron bars, also known as cast iron tubes, are designed to reduce material waste and machining time for cylindrical components such as bushings, sleeves, and hydraulic cylinders. Typical outer diameters range from 60 mm to 800 mm, with inner diameters customized according to wall thickness requirements. By selecting hollow bars close to the final dimensions, manufacturers can significantly lower production costs and improve efficiency.

In addition to nominal dimensions, size tolerances are an important aspect of continuous cast iron bars. Most suppliers offer rough-cast surfaces with machining allowances, while some provide pre-machined or precision-ground options for applications requiring tighter tolerances. The flexibility in size selection, combined with consistent material quality, makes continuous cast iron bars a reliable choice for both mass production and custom-made components.

Overall, the wide range of available sizes and shapes allows continuous cast iron bars to adapt to various engineering needs, ensuring optimal performance, cost-effectiveness, and manufacturing convenience.

 

Why is copper so expensive

Copper is considered expensive compared with many other industrial metals because of a combination of geological, economic, and technological factors that influence both its supply and demand. As one of the most widely used non-ferrous metals in the world, copper plays a critical role in modern industry, which significantly affects its market value.

One major reason copper is expensive is its limited and increasingly difficult supply. Although copper is not extremely rare, high-grade copper ore deposits are becoming harder to find. Many of the world’s largest and richest mines have been in operation for decades, and the average ore grade has steadily declined. This means more rock must be mined and processed to produce the same amount of copper, increasing extraction, energy, and labor costs. In addition, new mining projects require substantial capital investment and long development timelines, often taking more than ten years to become operational.

Another key factor is strong and growing global demand. Copper is essential for electrical wiring, power generation, electronics, construction, transportation, and industrial machinery because of its excellent electrical conductivity, thermal conductivity, and corrosion resistance. In recent years, demand has surged due to the expansion of renewable energy systems, electric vehicles, charging infrastructure, and smart grids. An electric vehicle, for example, uses significantly more copper than a traditional gasoline-powered car, further driving consumption.

Geopolitical and environmental factors also contribute to copper’s high price. Major copper-producing countries face political instability, labor strikes, and regulatory changes, which can disrupt supply. At the same time, stricter environmental regulations increase production costs, as mining companies must invest in sustainable practices, waste management, and emissions reduction.

Finally, copper’s value is reinforced by its recyclability and long-term importance. While recycling helps supplement supply, it cannot fully meet rising demand. Because copper has no true substitute in many critical applications, its strategic importance keeps prices high. Together, constrained supply, rising demand, high production costs, and limited alternatives explain why copper remains an expensive and valuable metal in the global market.

 

Copper sheeting for walls

Copper sheeting for walls is a highly versatile and aesthetically striking material widely used in interior and exterior architectural design. Its unique combination of durability, corrosion resistance, and visual appeal makes it a popular choice for both residential and commercial spaces. Copper sheets can be applied as full wall panels, feature walls, or decorative accents, creating a warm, luxurious, and timeless look that naturally develops a patina over time, adding depth and character to any environment.

One of the main advantages of copper sheeting is its long-lasting durability. Copper is naturally resistant to corrosion, rust, and microbial growth, making it an ideal material for areas exposed to moisture or high humidity, such as kitchens, bathrooms, or humid commercial environments. This resistance ensures that copper walls maintain their structural integrity and aesthetic appeal for decades with minimal maintenance. Additionally, copper is a highly malleable metal, allowing it to be cut, embossed, or shaped into custom designs, patterns, and textures, which adds artistic flexibility to architectural projects.

Copper sheeting also offers functional benefits beyond aesthetics. Its excellent thermal and electrical conductivity can contribute to energy efficiency in specific applications, while its natural antimicrobial properties make it a hygienic choice for hospitals, restaurants, or other public spaces. Available in various thicknesses and finishes—including polished, brushed, antiqued, and pre-patinated—copper sheets can be tailored to match contemporary, rustic, or industrial design themes.

Installation of copper sheeting is relatively straightforward. It can be mounted using adhesives, screws, or concealed fixings, depending on the wall type and design requirements. Proper sealing and occasional polishing can preserve its original shine, while allowing the metal to age gracefully if a patina finish is desired.

Overall, copper sheeting for walls combines elegance, durability, and functionality, making it a premium choice for designers and homeowners seeking a unique, long-lasting, and visually dynamic wall solution. Its natural beauty, adaptability, and maintenance-friendly properties ensure it remains a timeless feature in modern architecture.

Whatsapp email to up

Nếu bạn quan tâm đến sản phẩm của chúng tôi, bạn có thể để lại thông tin tại đây và chúng tôi sẽ sớm liên hệ với bạn.